BDNPX - LUBRIPLATE 130-A
- MSDS: BDNPX
- Manufacturer: FISKE BROTHERS REFINING CO
- Product Name: LUBRIPLATE 130-A
- National Stock Number: 9150-00-248-3480
Product Identification
Product ID:LUBRIPLATE 130-A
MSDS Date:01/01/1985
FSC:9150
NIIN:00-248-3480
MSDS Number: BDNPX
Responsible Party
Emergency Phone: (201) 589-9150
Cage: 9N579
Contractor
Telephone: 419-691-2491
Cage: 9N579
Ingredients
CALCIUM SOAP
MINERAL OIL (EXPOSURE REGULATED AS 'OIL MIST')
CAS: 8012-95-1
RTECS: PY8030000
OSHA PEL 5 MG/M3
ACGIH TLV: 5 MG/M3/10 STEL;9192
ADDITIVE
Hazards
Effects of Overexposure:SKIN: PROLONGED/REPEATED CONTACT MAY CAUSE MILD
IRRITATION.
First Aid
First Aid:SKIN CONTACT: WASH THOROUGHLY W/SOAP & WARM WATER. EYE: FLUSH
W/CLEAR WATER FOR 15 MIN. OR UNTIL IRRITATION SUBSIDES. IF
IRRITATION PERSISTS, CONSULT PHYSICIAN.
Fire Fighting
Flash Point:400F COC
Lower Limits:1.0
Upper Limits:6.0
Extinguishing Media:FOAM,DRY CHEMICAL,CO*2,WATER FOG OR WATER SPRAY
Fire Fighting Procedures:USE AIR SUPPLY BRTH EQUIP FOR ENCL AREAS. (SEE
SUPP DATA).
Unusual Fire/Explosion Hazard:DO NOT MIX OR STORE W/STRONG OXIDANTS
LIKE LIQUID CHLORINE OR CONCENTRATED OXYGEN.
Accidental Release
Spill Release Procedures:SCAPE UP GREASE, WASH REMAINDER W/PETROLEUM
SOLVENT (TAKING APPROP PRECAUTIONS W/THIS SOLVENT AS WELL). KEEP
PETROLEUM PRODUCTS OUT OF SEWERS & WATER COURES. ADVISE AUTHORITIES
IF SPILLED IN SEWERS/WA TER COURSES.
Handling
Handling and Storage Precautions:KEEP CONTAINERS CLOSED WHEN NOT IN
USE. DO NOT HANDLE OR STORE NEAR HEAT, SPARKS, FLAME OR STRONG
OXIDANTS.
Other Precautions:AVOID BREATHING OIL MIST. REMOVE OIL SOAKED CLOTHING
& LAUNDER BEFORE REUSE.
Exposure Controls
Respiratory Protection:NORMALLY NOT NEEDED ACCD TO MFR
Ventilation:USE LOCAL EXHAUST TO CAPTURE FUMES & VAPORS
Protective Gloves:OIL RESISTANT
Eye Protection:GOGGLES IF NECESSARY
Other Protective Equipment:OIL RESISTANT APRON
Supplemental Safety and Health
PERCENT VOLATILE BY VOLUME: NELGIGIBLE. FIRE FIGHTING: COOL EXPOS
CONTAINERS W/WATER SUPPLY. AVOID BREATHING VAP/FUMES.
Chemical Properties
HCC:V6
Boiling Pt:B.P. Text:>750F
Vapor Pres:.01
Vapor Density:>14
Spec Gravity:0.96
Evaporation Rate & Reference:<0.01 (N-BU AC)
Solubility in Water:NEGLIGIBLE
Appearance and Odor:LIGHT TAN GREASE W/MINERAL OIL ODOR
Stability
Stability Indicator/Materials to Avoid:YES
STRONG OXIDANTS LIKE: LIQ CHLORINE, CONC OXYGEN.
Stability Condition to Avoid:MAX. HEAT OVER 200F FOR PHYSICAL
STABILITY.
Disposal
Waste Disposal Methods:ASSURE CONFORMITY W/APPLICABLE DISPOSAL
REGULATIONS. DISPOSE OF ABSORBED MATERIAL AT AN APPROVED WASTE
DISPOSAL FACILITY OR SITE.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.